PowerFLO™ Filtration System

Our state-of-the-art filtration system is pre-programmed to clean your spa water using the low speed of your jet pump. The PDC pressure-side filtration system begins with the pump pulling spa water through safety suctions in the bottom and top of the spa, then forcing the used spa water with the pressure of the jet pump through the deep pleats of the filter cartridge where debris and contaminants are trapped. The result is clean, fresh water introduced back into your spa through the jet system.

This unique design is far more effective than suction-side systems whereby dirty water may bypass the filtration altogether. With PDC Spas, all the water is filtered, all the time. Feel confident that your spa water is fresh and clean!

EverPure™ Ozone System

The EverPure™ ozone system naturally and effectively purifies spa water.  Though ozone has many applications, activated oxygen is used primarily in water and air treatments to disinfect, detoxify, and deodeorize.  It is widely recognized as the most powerful and fastest, but above all the most ecological and natural means of deactivating bacteria.  The EverPure™ ozone system injects millions of tiny, concentrated ozone bubbles during the programmed filter cycle, giving off a fresh "after rain" smell. 

Harsh chemical use is reduced to a bare minimum and maintaining crystal clean water in your hot tub is simple and worry-free. We have recently added a cabinet mounted EverLite™ on all ozone equipped spa models, to assure you that your ozone is hard at work.  If your ozone system is not working properly, the indicator light will not be lit during the filtration cycle.

Our LX, Sun and AT Series spas are standard with the EverPure™ ozone system and EverLite™, while our SE Series spa units are ozone ready, with ozone as an option.