Each and every spa at PDC Spas is designed with you, the buyer, in mind. Not only is the hot tub efficient to operate with the exclusive patented TemperLOK system, but that same system has been designed to keep service quick and economical. Our spas are easy to install, easy to relocate, and simple to access the equipment, should your spa need service at some point.

All four sides of the cabinet are easily removed by simply removing four screws at the corner panels for dis-assembly. The RTB blanket is slit at each corner and designed to roll up, exposing the support components. This is a time-saver for service personnel, and a cost saver for the owner, as repair time is cut to the bare minimum. As opposed to a foam-filled spa, where it is necessary to chip away the foam to find a leak, etc., and once the repair is made the foam is gone! along with any insulation it had provided. With the PDC Spa design, simply roll down the RTB back in place, replace the cabinet sides and corners, and your spa is operational and insulated, just like it was the day of delivery. 

You will notice a flush mounted hose bib on the lower portion of one of the cabinet side panels. This is easily pulled out to attach a garden hose for quick and easy emptying of your spa. This should be done at least once a year and as often as needed depending on your water quality. Take note of this location when positioning your spa at time of installation.
 
Available in both series models, the ADVANTAGEPACK end cabinet option houses the plated support equipment and easily pulls away for inspection. This is a service man's dream!